98 Drives
www.dell.com | support.dell.com
From inside the drive bay, gently press on each side of the insert until it pops out.
8 Check all cable connections, and fold cables out of the way to provide airflow for the
fan and cooling vents.
9 Close the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
10
Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any
software required for drive operation.
11 Update your configuration information by setting the appropriate Drive option (0 or
1) under Drives: Secondary to Auto. See "Primary Drive n and Secondary Drive n" for
more information.
12 Verify that your computer works correctly by running the Dell Diagnostics.
To Next Page
Loading...
