Microprocessor Airflow Shroud 157
Installing the Microprocessor Airflow Shroud
1 Attach both fan power cables to the connectors on the system board.
2 Align the anchor tabs with the securing slots.
3 Gently press the shroud until the anchor tabs snap securely into place.
4 Close the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
5
Connect your computer and devices to electrical outlets, and turn them on.
1 shroud release lever
2 anchor tabs
3 anchor slots
To Next Page
Loading...
