Advanced Features 39
For more information about Dell's ASF implementation, see the ASF User's Guide and the
ASF Administrator's Guide, available on the Dell Support website at support.dell.com.
Dell OpenManage IT Assistant
IT Assistant configures, manages, and monitors computers and other devices on a corporate
network. IT Assistant manages assets, configurations, events (alerts), and security for
computers equipped with industry-standard management software. It supports
instrumentation that conforms to SNMP, DMI, and CIM industry standards.
Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available
for your computer. For information on IT Assistant, see the Dell OpenManage IT Assistant
User’s Guide available on the Dell Support website at support.dell.com.
Dell OpenManage Client Instrumentation
Dell OpenManage Client Instrumentation is software that enables remote management
programs such as IT Assistant to do the following:
• Access information about your computer, such as how many processors it has and what
operating system it is running
• Monitor the status of your computer, such as listening for thermal alerts from
temperature probes or hard-drive failure alerts from storage devices
• Change the state of your computer, such as updating its BIOS or shutting it down
remotely
System Password
Failure
The system password is invalid (after 3 failed
attempts).
Entity Presence Periodic Heartbeats have been transmitted to
verify computer presence.
Temperature - Too High
(critical)
The computer temperature is out of limits.
Voltage - Too Low
Too High (critical)
The computer voltage is out of limits.
Cooling Device Limits The computer fan speed/rpm is out of limits.
Ethernet Connectivity
Enabled/Ethernet
Connectivity Disabled
The Ethernet connectivity is enabled or
Ethernet connectivity is disabled.
Power Supply A fan or voltage failure exists inside the power
supply.
To Next Page
Loading...
