Figure 41. Installing the display back cover
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the 5G WWAN card.
5. Install the base cover.
6. Install the SIM card.
7. Follow the procedure in After working inside your computer.
Smart-card reader
Removing the smart-card reader
CAUTION: The information in this removal section is intended for authorized service technicians only.
NOTE: The smart-card reader is available only on certain configurations.
Removing and installing Field Replaceable Units (FRUs) 89