Dell Pro 16 Plus - USH Daughter Board; Removing the USH Daughter Board

Next steps
1. Install the 5G WWAN card
2. Install thebattery
3. Install thespeakers
4. Install the base cover.
5. Install the SIM card.
6. Follow the procedure in After working inside your computer
USH daughter board
Removing the USH Daughter Board
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card tray,if applicable.
3. Remove the base cover.
4. Remove the battery.
92
Removing and installing Field Replaceable Units (FRUs)