Delta Electronics DVP15MC11T

Chapter 12 Troubleshooting
1
2
System error code
Explanation Correction
Hexadecimal
Decimal
watchdog timeout time.
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3.
Redownload it after modifying the
program.
0x3054 12372
The actual time for executing the
priority 4 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3.
Redownload it after modifying the
program.
0x3055 12373
The actual time for executing the
priority 5 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3.
Redownload it after modifying the
program.
0x3056 12374
The actual time for executing the
priority 6 task exceeds the
set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Revise the program or re-download the
revised program.
0x3057 12375
The actual time for
executing the
priority 7 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Revise the program or re-download the
revised program.
0x3058 12376
The actual time for executing the
priority 8 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Redownload it after modifying the
program.
0x3059 12377
The actual time for executing the
priority 9 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Redownload it after modifying the
program.
0x305A 12378
The actual time for executing the
priority 10 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Redownload it after modifying the
program.
0x305B 12379
The actual time for executing the
priority 11 task exceeds the set
watchdog timeout time.
1. Reset the watchdog time to a larger
value for the task.
2. Check whether there is any infinite loop
in the program which the task calls.
3. Redownload it after modifying the
12-15