Delta DVP-ES3 Series Hardware Manual

Chapter 6 Writing a Program
6-27
6_
(5) Set the parameters in the
Driver Properties
dialog box, and then click
OK
.
Type a driver name in the
Driver Name
box.
Select
USB (Virtual COM
) in the
Type
list in the
Connection Setup
section.
Select a communication port in the
COM Port
list. If the first two steps are complete, the connected
PLC and its communication port display in the
COM Port
list.
Select the number of times to retry the sending of a command if a connection error occurs in the
Time
of Auto-retry
box, and select a retry interval in the
Time Interval of Auto-retry
box.
(6)
After you finish the setup, check if the Status of Driver is OK, you can close the window. And COMMGR is
successful installed in Windows.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English