Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
8-22
_8
NTP
Click NTP to synchronize the real-time clock in the CPU module to an NTP server. Please refer to related documents
or manuals for more information about NTP.
Select the
NTP Client Function Enable
check box, and then set the related parameters.
 Set the IP address for an NTP server. The CPU module corrects its internal time by connecting periodically to the
server.
 Set a time interval for correcting the time in the CPU module. If the interval is thirty minutes, the CPU module
connects to the NTP server every thirty minutes.
 Select a time zone in the
Time Zone
list.
Email
Click
Email
to set the email-related functions. The system sends email to the set email address after you enable the
email function. You can set up to four sets of conditions for sending email to up to four groups of email addresses.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English