Delta DVP-ES3 Series Hardware Manual

Chapter 8 Hardware Configuration
8-27
8_
Sockets
You can set the parameters for sockets through which data is transmitted. You must use this function with specific
applied instructions. Refer to the DVP-ES3 Series Programming Manual for more information, as sockets are not
described here. Refer to the related documents or manuals for more information about sockets. In the
Socket
table,
set COM port parameters for data transmission through Ethernet; however, you should use this function only with
specific API instructions. For relevant details, refer to DVP-ES3
/
EX3/SV3/SX3 Series Programming Manual.
The system for the DVP-ES3 Series module supports data transmission between the CPU module and other CPU
modules or devices through a socket as well as through TCP and UDP protocols. You can set up four connections in
each of the four groups. Select the
Socket Function Enable
checkbox and then select settings in the
TCP
and
UDP
setting pages.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English