Chapter 9 Ethernet Specification and Operation
9-19
Export Exports the IP/MAC address list; the file format is .CSV.
Enable BOOTP Enables the BOOTP to assign an IP address for the selected item.
Enable DHCP Enables the DHCP to assign an IP address to the selected item.
Disable BOOTP/DHCP
Disables the BOOTP/DHCP on the device; the device does not request an IP
addresses from the server.
Steps to set the IP address:
1. MAC address: find the MAC address on the EIP device. The MAC address uniquely identifies the device.
2. Open the IP Manager
In EIP Builder on the Tool menu, click IP Manager.
The IP Manager can be the BOOTP/DHCP Server, receiving IP address requests from devices. The IP
Manager window is shown below.
To Next Page
Loading...
Need help?
General
