Delta M42U

User can confirm grid code parameters as following, such as voltage and frequency
protection parameters.
More detail of F/VRT will be show in appendix.(For HECO and Rule 21).
4.3.7.12 Grid code confirm
Figure 4-20: Grid Code Confirm screens
S/N: RN11179CB0
Install: 01/01/2016
INV ID: 1
►
Meter
Energy Log
Event Log
Inverter Info.
EXIT
ENT
Country:
Insulation:
Baud Rate:
HECO A
100k
Ω
19200bps
FW Version
DSP:
COM:
SCM:
1.30
91.05
1.35
RED:
ARC:
61.06
1.05
AC connection:
Max. Power:
Dry Cont A:
Dry Cont B:
3P3W
46000W
Disable
Disable
►
EPO Normal Open
Grid Settings
Active Pwr Settings
React Pwr Settings
Commissioning
64