Denon AVR-1802 Operating Instructions

1
Press TUNER to set the input function to “TUNER”
(Main unit)
2
Watching the display, press BAND to select the desired band
(AM or FM).
3
Press MODE to set the auto tunihg mode.
MODE
\l,
-MO-
-57
:-: 4
’ ’ !I I’:-!
s-1 “1’
i-II .
:
:-. :.
.“. . ii
;f; i”, f,.i i.“.i ..l
.- ! ! t / A..
I
1 it
-..
(Main unit)
4
Press TUNING UP or DOWN.
(Main unit)
l Automatic searching begins, then stops when a station is
tuned in.
NOTE:
l When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
1
Press TUNER button to set the input function to “TUNER”.
TUNER
Y
(Main unit)
2
Watching the display, press BAND button to select the
desired band (AM or FM).
(Main umt)
3
Press MODE button to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
(Main unit)
-1
I
2
4
Press TUNING UP or DOWN button to tune in the desired
station.
(Mm unit)
l The frequency changes continuously when the button is
held in.
NOTE:
l When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
41

Denon AVR-1802 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.7 %
Power output per channel (1KHz@6 Ohm)	115 W
Power output per channel (20-20KHz@8 Ohm)	80 W
AC input voltage	120 V
AC input frequency	60 Hz
Equalizer	Yes
Audio decoders	DTS, Dolby Digital, Dolby Pro Logic II
3D	No
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
HDMI in	0
Composite video in	5
S-Video inputs quantity	4
Digital audio coaxial in	1
Digital audio optical in	3

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	171 mm
Weight	10900 g