Denon AVR-1802 Operating Instructions

Preparations:
Use the “Auto tuning” or “Manual tuning” operation to tune in the
station to be preset in the memory.
Press MEMORY button.
cl30
0000000
I
,
(Mar unit)
2
Press SHIFT button and select the desired memory block (A
to E).
(Main unit)
(Remote control unit)
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
3
Press PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
(Man unit)
(Remote control unit)
4
Press MEMORY button again to store the station in the
preset memory.
(Main unit)
%C To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset - 8 stations
(channels 1 to 8) in each of blocks A to E.
1
Watching the display, press SHIFT button to select the preset
memory block.
SHIFT
%
SHIFT
%
(Main unit)
(Remote control unit)
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
2
Watching the display, press PRESET UP or DOWN button to
select the desired preset channel.
DOWN-UP
(Main unit)
memote control tInIt)
42

Denon AVR-1802 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.7 %
Power output per channel (1KHz@6 Ohm)	115 W
Power output per channel (20-20KHz@8 Ohm)	80 W
AC input voltage	120 V
AC input frequency	60 Hz
Equalizer	Yes
Audio decoders	DTS, Dolby Digital, Dolby Pro Logic II
3D	No
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
HDMI in	0
Composite video in	5
S-Video inputs quantity	4
Digital audio coaxial in	1
Digital audio optical in	3

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	171 mm
Weight	10900 g