Denon AVR-1802 Operating Instructions

III
20 SPECIFICATIONS
n Audio section
l Power amplifier
Rated output:
Dynamic power:
Output terminals:
l Analog
LINE input - PRE OUT
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
Total harmonic distortion:
Rated output:
n Video section
l Standard video jacks
Input / output level and impedance:
Frequency response:
l S-video jacks
Input / output level and impedance:
Frequency response:
N Tuner section
Receiving range:
Usable sensitivity:
50 dB quieting sensitivity:
S/N ratio:
Total harmonic distortion:
n General
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
H Remote control unit (RC-897)
Batteries:
External dimensions:
Weight:
Front: 80 W + 80 W
(8 Q/ohms, 20 Hz - 20 kHz with 0.08% T.H.D.)
115 W + 115W (6 Q/ohms, 1 kHz with 0.7% T.H.D.)
Center: 80 W
(8 R/ohms, 20 Hz - 20 kHz with 0.08% T.H.D.)
115w
(6 Q/ohms, 1 kHz with 0.7% T.H.D.)
Surround: 80 W + 80 W
(8 Q/ohms, 20 Hz - 20 kHz with 0.08% T.H.D.)
115 W + 115W (6 R/ohms, 1 kHz with 0.7% T.H.D.)
100 W x 2 ch (8 Q/ohms)
145 W x 2 ch (4 R/ohms)
170 W x 2 ch (2 Q/ohms)
Front: A or B
6 to 16 R/ohms
A+B 12 to 16 n/ohms
Center/Surround:
6 to 16 Q/ohms
200 mV / 47 kQ/kohms
IO Hz - 100 kHz: +I, -3 dB (TONE DEFEAT ON)
100 dB (IHF-A weighted) (TONE DEFEAT ON)
0.008% (20 Hz - 20 kHz)
1.2 v
1 Vp-p, 75 Q/ohms
5Hz-IOMHz - +I,-3dB
Y (brightness) signal - 1 Vp-p, 75 Q/ohms
C (color) signal - 0.286 Vp-p, 75 n/ohms
5 Hz - 10 MHz - +I, -3 dB
[FM] (note: uV at 75 R/ohms, 0 dBf = 1 x 10 -15 W)
87.50 MHz - 107.90 MHz
1 .O uV (11.2 dBf)
MONO
1.6 uV (15.3 dBf)
STEREO 23 uV (38.5 dBf)
MONO
80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
MONO
0.15% (1 kHz)
STEREO 0.3% (1 kHz)
[AMI
520 kHz - 1710 kHz
18 uV
AC 12OV, 60 Hz
4.5 A
434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
10.9kg (24 Ibs 0.5 oz)
t,
RGPIAA Type (two batteries)
54 (W) x 172 (H) x 27.2 (D) mm (2-l/8” x 6-49/642” x l-5/64”)
120 g (Approx. 4.2 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
48

Denon AVR-1802 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.7 %
Power output per channel (1KHz@6 Ohm)	115 W
Power output per channel (20-20KHz@8 Ohm)	80 W
AC input voltage	120 V
AC input frequency	60 Hz
Equalizer	Yes
Audio decoders	DTS, Dolby Digital, Dolby Pro Logic II
3D	No
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
HDMI in	0
Composite video in	5
S-Video inputs quantity	4
Digital audio coaxial in	1
Digital audio optical in	3

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	171 mm
Weight	10900 g