GAVIN-8C Instruction Manual
- 32 -
Mode Switch(SF)
1/2
1. Position-1：
2.Position-2：
Gyro Off
Auto-Recovey
If AUX1 channel is set to OFF, the interface is shown as below. Please return
to Step 1 and reset the value of AUX1 channel.
Mode Switch
AUX1 channel is OFF
NOTE: If AUX1 channel is set to OFF, the sport receiver works on Normal
mode.
(2) (The operation for 3-position switch) Change the position of the switch to
select Position-1, Position-2, and Position-3, and then press R/+ or L/- key
to set the value.
Position-1, Position-2, and Position-3 are respectively used to assign the
desired flight mode to position-1, position-2, and position-3. Values:
Gyro Off: Choose this mode to disable the gyros for all channels. The
airplane will be completely under the control of the transmitter. Generally, it
is only used to test.
Normal: In this mode, the gyro will sense angular velocity on each axis and
make a momentary reaction. The normal mode is suitable for all types of
airplane. It can effectively improve the stability of your airplane, especially
on a windy day.
Auto-Recovery: It is also called Auto Balance Mode. Choose this mode to
lock the tilt angle on pitch and roll axis. When operating in this mode, the
airplane will maintain level flight automatically. When switch it to this mode
To Next Page
Loading...
