devention DEVO-7 - Page 157

DEVO-7 Page 157 of 170
Press ENT key, pop up “All Servos Hold?” Click Yes for all the servos will be locked at
the current statuses; click Cancel for unlocked. Press ENT to master channel select
interface.
1)Master channel setting: see below illustration,press R or L key, select the master
channel and can select as follows: ELEV、AILE、THRO、RUDD、GEAR、FLAP、
AUX2、OELEV、OAILE、OTHRO、ORUDD、AUX2
2）Slave channel setting:Press DN after setting the master channel setting,then enter
to the slave channel setting.see below illustration. Press R or L key,select the
designed slave channel, the selectable channel as follows: ELEV、AILE、THRO、
RUDD、FLPRL、FLAP、AUX2。