Dexter Laundry A Series Service Procedures And Parts Data

Common Troubleshooting Solutions
32
Symptom Probable Cause Suggested Remedy
No cold water Water Valve Coil Check coil continuity at terminals and replace if
to tub in wash no continuity.
Water Inlet Check water inlet screens for blockage and clean
Screens if necessary.
Water Check to insure that water is turned on and
operating.
Pressure Switch Check pressure switch continuity between
wired terminals. If no continuity, check
pressure switch hose for obstruction. If hose okay,
change pressure switch.
Programming Check that cold water is programmed.
No hot water Water Valve Coil Check coil continuity at terminals and replace if
in detergent no continuity.
dispenser
Water Inlet Check water inlet screens for blockage and clean
Screens if necessary.
Water Check to insure that water is turned on and
operating.
Flow restrictors Check that restrictors are not blocked by
removing hose from dispenser and inspecting
restrictor.
Water does not Water Valve Coil Check coil continuity at terminals and replace if
fl ush softener no continuity.
compartment.
Water Inlet Check water inlet screens for blockage and clean
Screens if necessary.
Water Check to insure that water is turned on and
operating.
Flow restrictors Check that restrictors are not blocked by removing
hose from dispenser and inspecting restrictor.
Troubleshooting

Dexter Laundry A Series Specifications

General

Brand	Dexter Laundry
Model	A Series
Category	Washer
Language	English