DGH TECHNOLOGY SCANMATE FLEX - Scan and Ubm Voice Controls

27
B-SCAN AND UBM VOICE CONTROLS
ENABLING VOICE CONTROL
Voice control can be enabled/disabled through the Preferences > System menu. Voice control
can be congured to begin upon pressing the [ENTER] key or by a verbal command of “Hey
Flex”. Voice control sensivity can be adjusted in this menu as well.
NOTE: To use the voice control feature, the computer running the Scanmate Flex soware must
have a connected (or integrated) microphone that is enabled.
NOTE: If the [ENTER] key is not congured to iniate a voice command, pressing it while on the
B-Scan Screen will automacally save an image.
VOICE COMMANDS
The following verbal commands are recognized by the Scanmate Flex soware while performing
a B-Scan or UBM scan. To issue a command, the user must rst say “Hey Flex” or press the
[ENTER] key (depending upon System Conguraon).
USER
VERBAL
COMMANDS
FLEX
AUDIBLE RESPONSE
FLEX
COMMAND EXECUTED
“Hey Flex” Tone: Double-Beep Voice control acvated. The soware is ready to
receive verbal commands.
“Start Scan” Verbal: “Starng Scan” The B-Scan / UBM scan will start.
“Stop Scan” * Verbal: “Scan Stopped” The B-Scan / UBM scan will stop.
“Change Eye” Verbal: “Eye changed to
OD/OS.”
The eye being scanned is changed. The audible
response will state if OD or OS is being scanned.
“Zoom In” N/A Zoom will enlarge the image or video.
“Zoom Out” N/A Zoom will reduce the image or video.
“Show Ruler” N/A The ruler overlay is shown.
“Hide Ruler” N/A The ruler overlay is hidden.
“Save Image” Verbal: “Image Saved” The currently displayed frame is saved.
“Save Video” Verbal: “Video Saved” The currently displayed video is saved.
“Open File” N/A A window is opened showing
B-Scan/UBM records for the currently loaded
paent.
“Yes” * N/A Selects ‘Yes’ for a dialog box prompts.
“No” * N/A Selects ‘No’ for a dialog box prompts.
* Indicates a command that DOES NOT require “Hey Flex” or an [ENTER] key press to
be iniated.