DGH 55B - 15 Dgh Connect Software; Software Requirements

Page 63 of 87 DGH 55B-INS-OMENG Rev: 3
15. DGH Connect Software
The DGH Connect Software is an application that allows the operator to use a Windows-based
PC to communicate with DGH devices. This software will interact with Pachette 4 and
Pachmate 2 devices.
To utilize DGH Connect, the PC must first be paired with the Pachmate 2. For information on
pairing refer to section 14.4.
15.1 Software Requirements
15.1.1 System Requirements
• Processor: 32-bit or 64-bit, 2 GHz
• Memory: 2 GB RAM
• Hard Drive: 1 GB minimum, 100 GB recommended
• Ports: USB 2.0
• Display: 1024 x 768 resolution
• Peripherals: Mouse (or Touchpad), Keyboard
• Bluetooth
®
Radio: v2.1 or later*
•
* Software is compatible with USB Bluetooth
®
adapters/dongles for desktop systems.
15.1.2 Compatible Operating Systems
• Microsoft Windows XP, Service Pack 3 or higher (32-bit)
• Microsoft Windows Vista, Service Pack 2 or higher (32-bit or 64-bit)
• Microsoft Windows 7 (32-bit or 64-bit)
• Microsoft Windows 8/8.1 (32-bit or 64-bit)
WARNING: Using “Non-Essential” software in conjunction with the DGH Connect
software could have unknown / adverse Impact on the operation of the software and is
therefore not recommended.
WARNING: Due to the threat of computer viruses, it is recommended that an anti-virus
program be installed on the computer running the DGH Connect software.
!
!