Page 7 of 87 DGH 55B-INS-OMENG Rev: 3
2. Description of Symbols
This symbol indicates a potentially hazardous situation which, if not avoided, could cause
injury or harm to the equipment, operator or patient.
This symbol indicates the type BF classification and is located on the front and back of
the unit.
This mark indicates that Notified Body 0120 (SGS United Kingdom Ltd) has certified the
management system of DGH Technology, Inc. meets the requirements of Directive
93/42/EEC Annex II (excluding section 4) for ultrasonic pachymeters.
This symbol located on the DGH 55B indicates that the equipment consists of electronic
assemblies and other components that may be subject to Directives 2002/96/EC,
2003/108/EC, and 2002/95/EC of the European parliament, which advises that electrical
and electronic devices must not be disposed of as normal domestic refuse. In order to
prevent environmental risks or endangerments by non-professional disposal, the disposal
of this product, including any accessories, must comply with valid practices as outlined in
Directives 2002/96/EC, 2003/108/EC, and 2002/95/EC and local regulations. All
electronic components and systems should be returned to Original Manufacturer for
disposal.
This symbol instructs the operator to read the operating manual.
This symbol indicates that DGH Technology, Inc. is the manufacturer of the DGH 55B
Pachmate 2 device. The YYYY under the symbol indicates the year the device was
manufactured.
This symbol indicates that Emergo Europe is the European Authorized
Representative for this device.
This symbol indicates that the model number of this device is DGH 55B.
This symbol indicates the serial number of the device. YYYY indicates
the year of manufacture and XXXX indicates the unit number.
To Next Page
Loading...