Installation 22
5 Installation
Consult Technical Data on page 60 for the specifications of the machine.
Before installing the machine, carefully read the safety instructions in Safety on page 8.
Failure to follow or disregard of the safety instructions may result in serious injury.
5.1 Transportation and Installation
The machine must be moved and transported in an upright position.
1. Place the machine on a flat, level surface. This is essential to ensure a trouble-free operation
of the machine.
Do not position machines with plastic covers in the vicinity of a heat source.
Make sure there is sufficient space (at least 15 cm) around the machine to ensure a
proper ventilation.
2. Verify that the machine housing is present and correctly fitted.
5.2 Connecting the Machine
1. Make sure the voltage stated on the machine plate matches the mains voltage.
2. Connect the machine to a grounded wall outlet to avoid fire or electric shock.
The power cable must be free at all times, and nothing may be placed on it.
Immediately replace the power cable if damaged.
3. Optional: Connect the gas supply for the gas flush system.
5.3 Prior to the First Use
1. Check the oil sight glass to see if the amount of oil in the pump is sufficient.
2. Optional: If the amount of oil in the pump is insufficient, refill it. See Removing Oil, Refilling Oil
on page 49.
3. Proceed with Starting the Machine on page 30 to start up the machine.
To Next Page
Loading...
