Diamond Boxer - Figure 10: Overview of the Menus

Operation 26
be opened. When logged in, the function settings can also be changed. To do so, return to the
navigation mode by pressing
◄
.
The machine remembers the last authorisation code used, even when the machine has
been turned off. Therefore, it may be necessary to manually change the authorisation
setting when you are done.
The basic functions below allow you to adjust the machine and/or function settings:
What to do? Action
Selecting a different setting Press
▲
or
▼
.
Editing the selected setting Press Enter.
Adjusting a variable Press
▲
or
▼
.
Conforming a variable Press Enter once the desired variable has been
found.
Return to the navigation mode Press
◄
when all settings have been set to
return to the navigation mode.
Figure 10: Overview of the Menus on page 27 shows all possible settings for all
functions.