Operation 47
1. Customer name
2. Label number
3. Name
4. Info
5. Use by / Storage life
6. Storage temperature
7. Print customer name Y/N
8. Print info Y/N
9. Print achieved vacuum Y/N
10. Print expiry date Y/N
11. Print user Y/N
12. Print storage temperature Y/N
Once the printer is selected and the required information for the label is entered, the printer can be
activated on each separate program. To do this, go to the main menu, all the way to the right. Here
you can enable or disable the printer and select the label number you require. You can also select
the number of labels you require per cycle.
If you require an additional label after the complete cycle has ended and all labels have already
been printed, select the Print extra label option. This will print the last printed label again.
To replace the label roll, follow the instructions in Replacing a Printer Roll on page 69.
To align the printer prior to printing the first label, follow the instructions in Aligning the Printer on
page 70.
To Next Page
Loading...
