- 24 -
DI-80 USER MANUAL
1.10.1.2 Counting Mode
There has to ways for individual product to issue receipt (Build-in Printer) or label (Barcode Printer) in Counting Mode, by place
the product on the platter or by enter the knowing quantity of the product.
OPERATION KEY DISPLAY
¼0»
NET
kg
0. 0 0 0
2. 0000 0
T
Pcs
1. At Counting Mode, enter the
existing PLU Number by
numeric key (Ex. 123) and
press [PLU] key.
10000
T
2. Enter the knowing Quantity
for the product (Ex.
10000Pcs).
Max. 9999999 can be
entering.
NET
Pcs
tot A L
Q U A N T I T Y 1 0 0 0 0
T T
3. Press [+] key.
Memory lamp light up.
Build-in Printer will start
printing if it connected and
label also be issue if machine
connect to Barcode Printer.
Refer to Note 1.
¼0»
NET
kg
0. 0 0 0
2. 0000 0
T T
Pcs
4. Press [C] key to exit from
Add. Mode.
Auto exit from Add. Mode
can be set at SPEC 32 bit 1.
NET
kg
5. 0 0 0
2. 0000 2500
T
T T
Pcs
5. Place the product on the
platter (Ex. 5kg).
Re-computing lamp light up.
Note 1: Label issue for Barcode Printer or Data send to PC only when [PRINT] key is depressed can be set at SPEC 19 bit 0.
To Next Page
Loading...
Need help?
General
