Digi XBee SX 868 - D2 (Dio2;Ad2); D3 (Dio3;Ad3)

AT commands I/O settings commands
XBee® SX 868 RF Module User Guide
134
Parameter Description
0 Disabled
1 N/A
2 ADC
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
D2 (DIO2/AD2)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO2/AD2 configuration (pin 31).
Parameter range
0, 2 - 5
Parameter Description
0 Disabled
1 N/A
2 ADC
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
D3 (DIO3/AD3)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO3/AD3 configuration (pin 30).
Parameter range
0, 2 - 5