Digi XBee SX 868 - P4 (Din;Config); P5 (DIO15;SPI_MISO Configuration)

AT commands I/O settings commands
XBee® SX 868 RF Module User Guide
140
Parameter Description
0 Disabled
1 UART DOUT enabled
Default
1
P4 (DIN/CONFIG)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIN/CONFIG configuration (pin 4).
Parameter range
Parameter Description
0 Disabled
1
UART DIN/CONFIG enabled
Default
1
P5 (DIO15/SPI_MISO Configuration)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO15/SPI_MISO configuration (pin 17).
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_MISO
2 N/A
3 N/A
4 Digital output low
5 Digital output high
Default
1