Digi XBee SX 868 - D6 (Dio6;Rts); D7 (Dio7;Cts)

AT commands I/O settings commands
XBee® SX 868 RF Module User Guide
136
Parameter Description
0 Disabled
1
Associate LED indicator
2 N/A
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
1
D6 (DIO6/RTS)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO6/RTS configuration (pin 29).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1
RTS flow control
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
D7 (DIO7/CTS)
This command applies to the XBee SX 868 RF Module.
Parameter range
0, 1, 3 - 7
Parameter Description
0 Disabled