Digi XBee SX 868 - P6 (SPI_MOSI Configuration)

AT commands I/O settings commands
XBee® SX 868 RF Module User Guide
141
P6 (SPI_MOSI Configuration)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO16/SPI_MOSI configuration (pin 16).
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_MOSI
2 N/A
3 N/A
4 Digital output low
5 Digital output, high
Default
1
P7 (DIO17/SPI_SSEL )
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO17/SPI_SSEL configuration (pin 15).
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_SSEL
2 N/A
3 N/A
4 Digital output low
5 Digital output, high
Default
1
P8 (DIO18/SPI_SCLK)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO18/SPI_SCLK configuration (pin 14).