Digi XBee SX 868 - P2 (DIO12 Configuration); P3 (Dout)

AT commands I/O settings commands
XBee® SX 868 RF Module User Guide
139
Parameter Description
0 Disabled
1 32.768 kHz clock output
2 PWM1 output
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
P2 (DIO12 Configuration)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO12 configuration (pin 5).
Parameter range
0, 3 - 5
Parameter Description
0 Disabled
1 N/A
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
P3 (DOUT)
This command applies to the XBee SX 868 RF Module.
Sets or displays the DOUT configuration (pin 3).
Parameter range
0, 1