Get started XBee Network Assistant
XBee® SX 868 RF Module User Guide
42
6. Click Start Range Test to begin the range test.
If the test is running properly, the packets sent should match the packets received. You will
also see the received signal strength indicator (RSSI) update for each radio after each
reception.
7. You can move the LOCAL_DEVICE and REMOTE_DEVICE farther from each other to observe the
signal strength at different distances.
8. Click Stop Range Test when the test is complete.
9. You can test different data rates by reconfiguring the BR (RF Data Rate) parameters on both
devices and starting a new range test.
XBee Network Assistant
The XBee Network Assistant is an application designed to inspect and manage RF networks created by
Digi XBee devices. Features include:
n
Join and inspect any nearby XBee network to get detailed information about all the nodes it
contains.
n
Update the configuration of all the nodes of the network, specific groups, or single devices
based on configuration profiles.
n
Geo-locate your network devices or place them in custom maps and get information about the
connections between them.
n
Export the network you are inspecting and import it later to continue working or work offline.
n
Use automatic application updates to keep you up to date with the latest version of the tool.
See the XBee Network Assistant User Guide for more information.
To install the XBee Network Assistant:
1. Navigate to digi.com/xbeenetworkassistant.
2. Click General Diagnostics, Utilities and MIBs.
3. Click the XBee Network Assistant - Windows x86 link.
4. When the file finishes downloading, run the executable file and follow the steps in the XBee
Network Assistant Setup Wizard.
XBee Multi Programmer
The XBee Multi Programmer is a combination of hardware and software that enables partners and
distributors to program multiple Digi Radio frequency (RF) devices simultaneously. It provides a fast
and easy way to prepare devices for distribution or large networks deployment.
To Next Page
Loading...
