Digi XBee SX 868 - Power Requirements

Technical specifications Power requirements
XBee® SX 868 RF Module User Guide
31
Operational frequency band
1
Channel # Frequency
L 10 865.15 MHz
11 865.35 MHz
12 865.55 MHz
13 865.75 MHz
14 865.95 MHz
15 866.15 MHz
16 866.35 MHz
17 866.55 MHz
18 866.75 MHz
19 866.95 MHz
20 867.15 MHz
21 867.35 MHz
22 867.55 MHz
23 867.75 MHz
24 N/A
2
M 25 868.15 MHz
26 868.35 MHz
N 27 868.85 MHz
28 869.05 MHz
Q/R
3
29 869.85 MHz
1
The operational frequency bands are in compliance with Table B.1 in ETSI EN 300 220-2 V3.1.1.
2
Channels 9 and 24 are removed to comply with section 4.3.4 of ETSI EN 300 220-2 V3.1.1
3
Band R applies when polite spectrum access is being used, i.e. more than one channel is enabled.
Band Q applies when polite spectrum access is not used, i.e. when channel 29 is the only enabled
channel.
Power requirements
The following table describes the power requirements for the XBee SX 868 RF Module.
Specification Condition Value
Supply voltage range 2.4 to 3.6 VDC
Typical supply voltage 3.3 V