Digi XBee SX 868 - Examples

Frame descriptions Receive Packet - 0x90
XBee® SX 868 RF Module User Guide
191
Offset Size Frame Field Description
Note Option values may be combined.
15-n variable Received
data
The RF payload data that the device receives.
EOF 8-bit Checksum 0xFF minus the 8-bit sum of bytes from offset 3 tothis byte
(between length and checksum).
Examples
Each example is written without escapes (AP=1) and all bytes are represented in hex format.For
brevity, the start delimiter, length, and checksum fields have been excluded.
64-bit unicast
A device with the 64-bit address of0013A20041AEB54Esent a unicast transmission to a specific
device with the payload of "TxData". The following frame is emitted if the destination is configured
with AO = 0.
7E 00 12 90 00 13 A2 00 41 AE B5 4E FF FE C1 54 78 44 61 74 61 C4
Frame type 64-bit source Reserved Rx options Received data
0x90
0x0013A200
41AEB54E
0x5614 0xC1 0x547844617461
Output
Unused
ACK was sent in DigiMesh mode "TxData"