Revision history—90001538
Revision Date Description
C May 2018 Added note on range estimation.
D March 2019 Added a receiver category to Performance specifications.
E November
2020
Added the C8 and R? commands. Added the Sleep Immediate and
Synchronous pulse sections. Added information on randomizing a single
I/O sample. Revised BC.
F July 2021 Added safety instructions and UKCA labeling requirements.
G March 2022 Added translated safety instructions.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
their respective owners.
© 2022 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Trace (if possible)
XBee® SX 868 RF Module User Guide
2
To Next Page
Loading...
