Digi XBee SX 868 - Module Modes

Modes
The XBee SX 868 RF Module is in Receive Mode when it is not transmitting data. The device shifts into
the other modes of operation under the following conditions:
n
Transmit mode (Serial data in the serial receive buffer is ready to be packetized)
n
Sleep mode
n
Command Mode (Command mode sequence is issued (not available when using the SPI port))
Transmit mode 93
Receive mode 93
Command mode 93
Sleep mode 95
Force UART operation 96
XBee® SX 868 RF Module User Guide
92