DigiDesign C24 User Manual

Chapter 9: Working with C|24 97
QuickPunch Recording
To punch in/out while audio recording with
QuickPunch:
1 Press the QuickPunch switch in the Transport
Modes section so that it is lit.
2 To hear track material up to the start of the
punch, enable pre-roll by pressing the Pre-Roll
switch in the Transport Modes section.
3 Place the playback cursor at a location before
the punch-in point.
4 Record-enable the tracks where you want to
record by pressing their Record Enable switches.
5 Arm Pro Tools for recording by pressing the
Record switch in the Transport section.
6 Press the Play switch in the Transport section.
7 When you reach a punch-in point, press the
Record switch in the Pro Tools Transport.
8 When you reach a punch-out point, press the
Record switch in the Pro Tools Transport again.
Recording MIDI
To record MIDI:
1 Enable the click by pressing the Click switch
in the Tools & Functions section so that it is lit.
2 Enable either Wait For Note or Countoff by
pressing the corresponding switch in the Tools
& Functions section so that it is lit.
3 Record enable the MIDI or Instrument tracks
where you want to record by pressing their
Record Enable switches.
4 Arm Pro Tools for recording by pressing the
Record switch in the Transport section.
5 Press the Play switch in the Transport section.
6 When you are finished, press the Stop switch
in the Transport section.
Loop Recording MIDI
To loop record MIDI:
1 Press the Link Edit and Timeline switch in the
Tools & Functions section so that it is lit.
2 Press the Merge-Record switch in the Tools &
Functions section so that it is lit.
3 Press the Loop Playback switch in the Trans-
port Modes section so that it is lit.
4 Enable the click by pressing the Click switch
in the Tools & Functions section so that it is lit.
5 Disable Wait For Note and Countoff by press-
ing the corresponding switches in the Tools &
Functions section so that they are unlit.
6 To hear track material up to the start of the
loop, enable pre-roll by pressing the Pre-Roll
switch in the Transport Modes section.
7 Select the range in the Edit window that you
want to loop.
8 Record enable the MIDI or Instrument tracks
where you want to record by pressing their
Record Enable switches.
9 Arm Pro Tools for recording by pressing the
Record switch in the Transport section.
10 Press the Play switch in the Transport sec-
tion.
11 When you are finished, press the Stop switch
in the Transport section.

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply