C|24 Guide10
Meter Bridge
The Meter Bridge features a six-channel output
meter, 24 pairs of channel meters, a Pro Tools
Main Counter display, and a built-in Talkback
microphone.
Mic/Line/DI Preamplifier Controls
C|24 includes 16 analog Mic/Line preamplifiers,
with phantom power capability and a switch-
able high-pass filter. Four channels have avail-
able 1/4-inch inputs connectors that override
the DB-25 inputs.
Line Submixer
C|24 also includes an analog line submixer with
8 stereo inputs and a stereo output that can be
used to integrate analog studio equipment into
your studio. The external output of the sub-
mixer can be can be routed to a Pro Tools audio
interface. Line submixer output can also be
routed internally to the Monitoring section.
Monitor Section
The Control Room Monitor section provides
two selectable input sources, Main and Alt (both
supporting up to 5.1 Surround); and two select-
able outputs, Main (supporting 5.1, LCRS or Ste-
reo monitoring modes) and Alt (supporting Ste-
reo monitoring only). It also provides Cue mix
output, Studio LS output, and full Talkback and
Listenback capability to facilitate studio com-
munication.
Miscellaneous Controls
C|24 provides one-touch access to Pro Tools Edit
modes, Edit tools, MIDI commands and opera-
tions, Pro Tools windows, Groups, Memory Lo-
cations, Window Configurations, and a range of
powerful global controls that let you apply oper-
ations to multiple tracks.
Transport and Navigation Controls
C|24 gives you full control of Pro Tools trans-
port functions with one-touch access to a range
of audition functions, plus dedicated switches
for multiple playback and recording modes. The
Scrub /Shuttle wheel and Navigation key quad-
rant allow quick navigation in Pro Tools.
Channel Bar
The Channel Bar provides powerful controls for
viewing, assigning, and editing Inputs, Outputs,
Inserts, Sends, Pan controls, plug-in parameters,
Digidesign PRE settings, and C|24 settings.
LCD Displays
Three multi-purpose 55x2 LCD displays provide
access to a range of track information, Channel
Bar functions, Soft Key commands, and C|24
settings.
Rotary Encoders
Twenty-four multi-purpose rotary encoders let
you view and control volume and pan values,
edit plug-in parameters, and make assignments.
Automation Controls
C|24 includes dedicated controls for setting the
automation mode of individual channels, for
enabling and suspending automation types, and
setting the global automation mode.
Fader Section
Twenty-four 100mm touch-sensitive, motorized
faders allow precise control and automation of
track volume. Flip mode lets you control addi-
tional Pro Tools parameters from the faders.
To Next Page
Loading...
Need help?
General
