DVR Server Manual
automatically.
【Video Output Mode】Select video output mode. When you select “IP only”,
it will output via network only. Select “NTSC+IP”, it will output with
NTSC signal and the image setting output from the network will be
limited. When this mode is selected, Analog video setting is
enabled and set. So is “PAL+IP”.
【Iris Open】Select whether open the iris of the auto iris lens for focus
adjustment.
【Color】Select Color or Monochrome for the image.
【Camera Setting】Select the gamma curve in the camera from the following 7
options according to the subject and shooting conditions:
Standard, Scene 1, Scene 2, Scene 3, Scene 4, Scene 5 and
Scene 6. “Standard” is suitable for many shooting conditions.
【Image Quality】Select a suitable image quality for camera.
【Audio Input】Select whether you are going to send the audio from the audio
connector. Select “On” to send the audio from the network
camera.
【Audio Input Level】Set the volume level of the audio input from the audio
connector. It is adjustable from -10 to +10.
【Audio Encode】Select the bit rate when you send the audio from the audio
connector. G.711 (64kbps), G.726 (40kbps), G.726 (32kbps),
G.726 (24kbps) or G.726 (16kbps) can be selected.
【Audio Upload】Select whether enable to output the audio from the speaker.
【Saturation】Select the saturation in 7 steps, from -3 to +3. Selecting +3
provides the image with the highest saturation.
【Sharpness】Select the sharpness in 7 steps, from -3 to +3. Selecting +3
provides the image with the highest sharpness.
【Contrast】Select the contrast in 7 steps, from -3 to +3. Selecting +3 provides
the image with the highest contrast.
【Custom Template】When you select a custom template, Exposure
compensation, Backlight compensation and Gamma setting
are set optimally depending on shooting conditions.
【White Balance】Select the white balance mode.
【R/B Gain】While White Balance is selected as “manual”, R gain and B gain
become active. Selectable gain values are from 0 to 255.
【Superimpose】Select whether to superimpose camera ID and/or Date &
To Next Page
Loading...