DVR Server Manual
Chapter6 Mobile Client
Mobile clients in our software now support different kinds of mobile
phones, such as Nokia, BlackBerry and Iphone, etc. You can view any
cameras, including board card cameras and IP cameas supported by our
software, even megapixel cameras. And you don’t have to set dual-stream
now.
6.1 Recommended Mobile Phone
Requirements
1. Before you run Mobile Client, please check if your mobile phone
supports JAVA and comply with following applicable standards:
CLDC version: CLDC-1.0
MIDP version: MIDP-2.0
2. Your mobile telephone should have GPRS or CDMA to transport data.
3. Set Internet as the access point of your phone call.
4. When you want to view some megapixel cameras, the memory of your
mobile phone should be great.
5. Select “Enable” to allow the PDA to connect W ith DVR server in
the
Network setup of the DVR system.
Note:
GPRS is charged by data flow, so shut down the MobileDVR application if
you do not need view cameras.
6.2 Download software
You have following methods to download our mobile client software:
1. Download through wireless technology (in Wireless LAN) such as
Blue tooth, infrared.
2. Copy mobile client software to phone directly through data cable.
3. Download mobile client software through OTA (in WAN), it will
describe as follow:
Enter “http://IP:PORT/ MobileDvr.jar (and another is MobileDvr.jad)” in the
address bar of the mobile telephone internet explorer to download the setup
package of the Mobile Client.
Note:
IP: the IP address of the DVR server.
To Next Page
Loading...