DVR Server Manual
【Net Gate】
【Net Cable Type】
【Connection configuration and related parameter】
【If use PPPOE】
【PPPOE Login Name】
【PPPOE Login Pass】
【User Pass】Set the user password of DVS remotely, after that operation
you should change the Login Pass to corresponding value in Add / Modify
server. Otherwise, you can’t connect the DVS correctly.
【DNS Server IP】If use DNS, input the DNS host IP address.
【Remote manage】
【Remote manage IP】
【Remote manage port】
3.3 Channel setup
Press button to set channel parameters.
This section contains the parameters to designate a name for every
camera connected, to enable or disable show LOGO and OSD, and to set
If system uses PPPOE to connect with web,
please select it and input the PPPOE login
ID and password.
Set the IP address and port of host
server who will receive the message
upload from foreside server
To Next Page
Loading...