DVR Server Manual
NTSC, it is available when the input video is lost and for the decoder to
playback local video to TV Wall.
【Window Split Mode】Select window split mode for DVR between
“Normal Mode” and “Wide Screen”. You would better select “Wide Screen”
when you are using wide screen monitor. You should re-select the view
window number to refresh the window split mode status.
【Grab picture save to 】Select the path to save the grabbed pictures.
2.1.2 Network setup
【Remote Connection】Select using network or not. If select “disable”, it
will not permit any client connect this DVR system;
【Remote Connect Port】Select remote connection port for Clients.
【Remote buffer Priority】There are three items selected.” smooth”
demands the system have large buffer.＂real-time＂demands there have
enough bandwidth. Otherwise, the data off and on when it is sent from the
network.
【Automatic Alarm Notification client IP】Assign a network client to
receive alarm message when there is an alarm. The alarm channel image will
auto display in the client software. But user must be sure that client is running
on that IP address.
Note:
Alarm auto connection to IP is used to input alarm automatically. When
sensor, normal or motion record is set to input and there is IP address, the
system will check if the client has connected with this system. If there is no
connection, the system will try to connect with it through Port 5300(preset).
While it cannot be connected, the system will keep trying till the connection is
OK. So please ensure that your client’s program is in use, Port 5300 is
listening and the network is in good condition. If not so, the system will not be
stable.
【Alarm Send Port】This is the alarm message connecting port, which is
used to send alarm from DVR Server to Client.
【Web Server Port】The IE client connecting port. Default value is 80 for
http access; but for some windows XP edition, it shields 80 ports. In this case,
user should modify this port to other port, such as 1280. After that, user must
reboot DVR server, then user can access DVR server via IE Client like this:
http://IP: 1280 (IP can be a static IP or dynamic domain name).
【Use DNS】 Select use DNS or not, support dynamic IP.
【 Local Host Name 】 Input the name description for DNS Server
identification.
【DNS Server IP】DNS server host IP.
【DNS Connection Port】DNS server host port ,it is used to connect DNS
server.
To Next Page
Loading...