Dinstar MTG200 - ACL Control Config; VLAN Config

MTG200 Trunk Gateway User Manual | Dinstar
33
4.5.4 ACL Control Config
Parameter
Explanation
Web Access Control
If this parameter is enabled, those IP addresses that are not on
the ACL whitelist cannot visit the MTG200 device through
Web.
Telnet Access
Control
If this parameter is enabled, those IP addresses that are not on
the ACL whitelist cannot visit the MTG200 device through
Telnet.
Note：
You need to disable Web access control and Telnet access control, otherwise,
the MTG200 device cannot be visited through Web or Telnet.
4.5.5 VLAN Config