Dinstar MTG200 - Dial Plan

MTG200 Trunk Gateway User Manual | Dinstar
59
4.9.5 Dial Plan
Dial plan is used for the MTG200 to identify how many digits that a received number
includes. Dial rules can be divided into 5 groups with dial plan IDs. The setting in dial plan
0 is the default setting.
Click the Add button, and you can add a new dial plan in the following interface.
Parameter
Explanation
Dial Plan ID
The ID of the dial plan
Index
Each dial plan has a unique index. Greater index value, higher
priority for the dial plan.
Prefix
The prefix matching received numbers, through which the
MTG200 can judge how many digits the received number includes.
Min Length
The minimum number of digits included in a telephone number
(generally from 0 to 30). If the length of a received number falls
within the range of between the set minimum length and the set
maximum length, call connection will continue.
Max Length
The maximum number of digits included in a telephone number
(generally from 0 to 30). If the length of a received number reaches
the set maximum length, MTG200 deems that all digits of the
number have been received and will begin to analyze the telephone
number, and if there are still digits being sent, MTG200 will not
receive them.
Note：
1. Dial plans can be backed up and restored at the Maintenance ->
Data Backup interface and the Maintenance -> Data Restore
interface respectively.