Dinstar MTG200 - Page 86

MTG200 Trunk Gateway User Manual | Dinstar
80
Parameter
Explanation
IP Profile ID
The ID of the IP profile, from 1 to 15.
Description
Description of the IP profile
Declare RFC2833 in
SDP
Whether to declare RFC2833 in SDP
Default value is ‘Yes’.
Support Early Media
Whether to support Early Media (183)
If ‘Yes’ is selected, ringback tone will be played to the caller
before the call is successfully connected.
Ringback Tone to
PSTN Originated
from
Where the ringback tone to PSTN side is originated from
If ‘Local’ is selected, the ringback tone is played from
MTG200.
If ‘IP’ is selected, the ringback tone is played from the IP
network
Ringback Tone to IP
Originated from
Where the ringback tone to IP network l is originated from
If ‘Local’ is selected, the ringback tone is played from
MTG200.
If ‘PSTN’ is selected, the ringback tone is played from the
PSTN.
Wait for RTP Packet
from Peer
If ‘Yes’ is selected, RTP packets will be sent from peer device
to MTG200 first, and then RTP packets will be sent from TG
to peer device.
If ‘No’ is selected, RTP packets will be sent automatically
during calling;
T.30 Expanded Type
in SDP
There are two T.30 expanded types: X-Fax and Fax