DITEC CS12M - 7 Adjustments; Switching on and off

11
EN
IP2163EN
The procedure to switch on the display is as follows:
• press the ENTER key
• the display functioning check starts
• the first level menu is displayed
The procedure to switch off the display is as follows:
• press the ESC key
NOTE: the display switches off automatically after 60 s of inactivity.
7. Adjustments
7.1 Switching the display on and off
NOTE: pressure on the keys can be quick (less than 2 s) or prolonged (longer than 2 s).
Unless specified otherwise, quick pressure is intended.
To confirm the setting of a parameter, prolonged pressure is necessary.