2
EN
IP2163EN
Contents
Subject Page
1. General safety precautions 3
2. EC Declaration of Conformity 4
3. Technical specifications 4
4. Commands 5
4.1 Inserting plug-in card (AUX) 6
4.2 Self-controlled safety edge 6
5. Outputs and accessories 8
6. Selections 10
7. Adjustments 11
7.1 Switching on and off 11
7.2 Key combinations 12
7.3 Main menu 13
7.4 Second level menu - AT (Automatic Configurations) 14
7.5 Second level menu - BC (Basic Configurations) 16
7.6 Second level menu - BA (Basic Adjustment) 18
7.7 Second level menu - RO (Radio Operations) 22
7.8 Second level menu - SF (Special Functions) 22
7.9 Second level menu - CC (Cycles Counter) 27
7.10 Second level menu - EM (Energy Management) 29
7.11 Second level menu - AP (Advanced Parameters) 31
8. Display visualisation mode 37
8.1 Display of automation status 37
8.2 Display of safety devices and commands 39
8.3 Display of alarms and faults 41
9. Start-up 45
10. Troubleshooting 46
11. Examples of application 48
12. Examples of applications for parallel automations 50
13.
Examples of application for automations with two-way interlocking device with-
out presence detection
51
14.
Examples of application for automations with two-way interlocking device with
presence detection
52
Key
This symbol indicates useful information for the correct functioning of the product.
Factory settings
This symbol indicates instructions or notes regarding safety, to which special attention
must be paid.
To Next Page
Loading...
Need help?
General
