DITEC CS12M - Page 30

30
EN
IP2163EN
7.10.1 Additional EM level parameters that can be configured
(available with → enabled)
Display Description
LL - Voltage threshold for indicating that batteries are
almost flat (V)
17 - Minimum
24 - Maximum
NOTE: it is set with an interval of sensitivity of 0.5 V
shown when the decimal point on the right lights up.
22
LB - Indication that batteries are almost flat
00 - Indication on display (alarm message ).
01 - Indication on flashing light (with the automation
stopped, it flashes 4 times keep happening every
hour) and display (alarm message ).
02 - Indication on gate open indicator light (with the
automation closed, it flashes 4 times keep hap-
pening every hour) and display (alarm message
).
EM - Energy management