DITEC ENTREMATIC HA9 - Compliance Codes and Technical Specifications

Entrematic Canada Inc.
Toll Free: 1-877-348-6837
info.ditec.ca@entrematic.com
www.ditecentrematic.ca
Entrematic USA Inc.
Toll Free: 1-866-901-4284
info.ditec.us@entrematic.com
www.ditecentrematic.us
Pg. 8
HA9 Manual V. 1.3
1019956
1.5 Compliance Codes and Standards
The operator complies with the following codes and standards:
• UL STD.325 & ANSI/BHMA STD. A156.19; Fire rated UL STD. 10 (b); UL STD. 10(c); NFPA STD. 252
• CAN/CSA STD. C22.2 NO. 247 & CAN/ULC STD. S104
• Under No Circumstances shall the Certification Label of the HA9 operator be tampered, modified
or removed!
• It is the responsibility of the final installer and/or installation company, to certify that the final
completed operator is installed in accordance with local building codes and applicable laws.
1.6 Technical Specifications
Manufacturer:
Ditec Entrematic
Type:
HA9
Power supply:
120 V AC +10/-15%, 50/60 Hz
Power consumption:
Max. 75 W (AVG. 25 W)
Auxiliary voltage:
24 V DC, max. 400 mA
Internal control fuse:
2 x T 6,3 AH 250 V
Max. weight/width:
Push arm: 200 lbs./48" (94.3kg/1219mm)
Note: Refer to the appropriate standard (ANSI A156.10 or ANSI
A156.19) for door forces and speeds as related to door weight
and width.
Door width:
Electro-mechanical locking device:
36-48” (914-1219 mm)
Selectable: 12V DC, max. 500 mA / 24 V DC, max. 250 mA
Door weight:
100-200 lb. (45-90 kg)
Door opening angle:
Push arm:80° - 110°, with reveal 0 - 14" (0 - 356 mm)
Pull arm: 80° - 110°, with reveal 0 - 2 ⅜” (0 - 60.33 mm)
Opening time (0° - 80°):
variable between 3 - 6 seconds
Closing time (90° - 10°):
variable between 3 - 6 seconds
HOLD open time:
1,5-30 seconds
Ambient temperature:
-4 °F to +113 °F (-20 °C to +45 °C)
Degree of protection:
IP20
Degree of protection, control actuators:
IP54
Relative humidity (non-condensing):
Max. 85%
Standards:
The HA9 complies with IEC 335-1, ANSI/BHMA A156.19 and UL 325.
1.0 GENERAL INFORMATION