To Next Page

To Previous Page

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual

Using the Battery

Installing and Removing the Battery

Open the battery locking arm and insert the Intelligent Flight Battery into the battery

compartment of the aircraft until a click is heard. Close the battery locking arm until the orange

mark completely disappears, which indicates the battery locking arm is in the lock position.

To remove the battery, open the battery locking arms, then press the battery buckles and

remove the battery.

Checking Battery Level

Using DJI FlightHub 2

There are two ways to check the battery information in DJI FlightHub 2.

1. Open the Project page, click > to view the battery level and battery status.

2. Open the Devices page, click Dock > to view the battery level and battery temperature,

battery cycles and other information.

Using the Power Button

Press the power button once to check the battery level.

dji MATRICE 3D Series Flight Manual

Other manuals for dji MATRICE 3D Series