DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
35
Dock Cover Status Indicator and Buzzer Alerts
Normal States
Blinks white
The dock is working normally and the aircraft is ready
to take o.
Blinks blue
The dock and the aircraft are linking, and the buzzer
emits a short beep.
Blinks green
The aircraft has taken off from the dock and is
performing a ight task.
—— Solid blue
The dock is updating or debugging (including remote
debugging and on-site debugging).
Warning States
Blinks red
The dock cover is moving or the aircraft is taking o or
landing, and the buzzer emits a long beep.
Keep a safe distance from the dock to avoid
injury.
Blinks red and yellow
alternately
The emergency stop button on the dock is pressed.
Using the Open or Close Button
1. Make sure the dock is powered on, and the dock cover status indicators are blinking.
2. Use a 2.5mm hex key to loosen the two screws on the electrical cabinet door. Pull the door
to open.
3. Press and hold the open or close button, and the dock cover will open or close.
• Make sure there are no obstacles blocking the dock cover. Keep your hands away from
the dock cover to avoid injury.
• Before closing the dock cover, make sure to adjust the propeller position as shown in
the diagram in order to avoid breaking the propellers when closing the dock cover.
To Next Page
Loading...
