dji MATRICE 3D Series - Page 37

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
37
• The wind speed gauge can only measure the wind speed near the dock, which may
be dierent from the wind speed provided by the local meteorological department.
If the aircraft ascends to a high altitude, the wind speed and direction may change
signicantly. Fly with caution when the measured wind speed is close to 8 m/s.
Rainfall Gauge
The rainfall gauge is used to measure rainfall information near the dock. The rainfall gauge
features self-heating and is able to work in low-temperature environments. Users can view the
rainfall information in DJI FlightHub 2. To ensure flight safety, the aircraft cannot take off in
heavy rain.
• There is a pressure sensing module in the rainfall gauge. DO NOT press hard on
the surface of the rainfall gauge. Otherwise, the pressure sensing module may be
damaged.
• Regularly clean the rainfall gauge surface. Replace the rainfall gauge immediately if it
is deformed or damaged.
• If the dock is installed near a vibration source such as near railways, false detection of
rainfall may be triggered. Try to keep the dock away from areas with strong vibration
sources or strong noise.